design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer aluminum solid capacitors f d l 15 min. 4 min. 19 min. f d f + ? lot. no. polarity marking (?) series r. capacitance r. voltage radial lead type series : seqp ? externals of ? gure are the reference. high voltage (32 v.dc max.) 125 c 1000 h rohs compliance, halogen free features size code c6 e7 f8 e12 f13 category temperature range ?55 c to +125 c rated voltage range 4 v.dc to 20 v.dc 4 v.dc to 32 v.dc 4 v.dc to 20 v.dc rated capacitance range 22 f to 150 f 6.8 f to 330 f 15 f to 680 f 18 f to 560 f 150 f to 1200 f capacitance tolerance 20 % (120 hz / + 20 c) leakage current please see the attached characteristics list dissipation factor (tan ) please see the attached characteristics list endurance +125 c, 1000 h/+105 c, 5000 h, rated voltage applied capacitance change within 20 % of the initial value tan < 200 % of the initial limit dc leakage current within the initial limit damp heat (steady state) +60 c, 90 % to 95 %, 1000 h, no-applied voltage capacitance change within 20 % of the initial value tan < 150 % of the initial limit dc leakage current within the initial limit (after voltage processing) unit : mm size code f d0.5 l max. f0.5 f d0.05 c6 6.3 6.0 2.5 0.45 e7 8.0 7.0 3.5 0.45 f8 10.0 8.0 5.0 0.50 e12 8.0 12.0 3.5 0.60 f13 10.0 13.0 5.0 0.60 marking dimensions (not to scale) speci cations nov. 2015 01 downloaded from: http:///
design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer aluminum solid capacitors characteristics list series rated voltage (v.dc) rated capacitance (f) case size (mm) size code specifications part number f d l ripple ? 1 current (mar.m.s.) allowable ? 1 ripple current (mar.m.s.) esr ? 2 (m max.) tan ? 3 lc ? 4 (a) seqp 4.0 150 6.3 6.0 c6 572 1810 40 0.12 300 4seqp150m 330 8.0 7.0 e7 810 2560 35 0.12 660 4seqp330m 560 8.0 12.0 e12 1430 4520 13 0.15 448 4seqp560m 680 10.0 8.0 f8 1170 3700 25 0.12 544 4seqp680m 1200 10.0 13.0 f13 1721 5440 12 0.18 960 4seqp1200m 6.3 82 6.3 6.0 c6 537 1700 45 0.12 258 6seqp82m 150 8.0 7.0 e7 810 2560 35 0.12 472 6seqp150m 330 10.0 8.0 f8 1170 3700 25 0.12 416 6seqp330m 470 8.0 12.0 e12 1332 4210 15 0.15 592 6seqp470m 820 10.0 13.0 f13 1721 5440 12 0.15 775 6seqp820m 10 56 6.3 6.0 c6 537 1700 45 0.12 280 10seqp56m 120 8.0 7.0 e7 810 2560 35 0.12 600 10seqp120m 270 10.0 8.0 f8 1170 3700 25 0.12 540 10seqp270m 330 8.0 12.0 e12 1250 3950 17 0.15 660 10seqp330m 560 10.0 13.0 f13 1655 5230 13 0.15 840 10seqp560m 16 39 6.3 6.0 c6 512 1620 50 0.10 312 16seqp39m 82 8.0 7.0 e7 670 2120 40 0.12 656 16seqp82m 150 10.0 8.0 f8 955 3020 30 0.12 480 16seqp150m 180 8.0 12.0 e12 1151 3640 20 0.15 576 16seqp180m 330 10.0 13.0 f13 1493 4720 16 0.15 792 16seqp330m 20 22 6.3 6.0 c6 458 1450 60 0.10 220 20seqp22m 47 8.0 7.0 e7 598 1890 45 0.12 470 20seqp47m 68 10.0 8.0 f8 759 2400 40 0.12 272 20SEQP68M 100 8.0 12.0 e12 1050 3320 24 0.15 400 20seqp100m 150 10.0 13.0 f13 1367 4320 20 0.15 600 20seqp150m 32 6.8 8.0 7.0 e7 440 1400 100 0.10 44 32seqp6r8m 15 10.0 8.0 f8 560 1800 80 0.10 96 32seqp15m 18 8.0 12.0 e12 790 2500 50 0.12 115 32seqp18m ? 1 ripple current (100 khz/ +105 c < tx < 125 c), allowable ripple current (100 khz / tx < 105 c) ? 2 esr (100 khz to 300 khz/+20 c) ? 3 tan (120 hz/+20 c) ? 4 after 2 minutes please refer to each page in this catarog for ?flow conditions? and ?taping specifications?. frequency 120 hz < f < 1 khz 1 khz < f < 10 khz 10 khz < f < 100 khz 100 khz < f < 500 khz coef? cient 0.05 0.3 0.7 1 frequency correction factor for ripple current nov. 2015 01 downloaded from: http:///
if you want to use our products described in this onlin e catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially caus e personal injury (e.g. aircraft and aerospace equipment, traffic and transportat ion equipment, combustion equipment, medical equipment, accident prevention, anti-crime eq uipment, and/or safety equipment), it is necessary to verify whether the specificatio ns of our products fit to such applications. please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. the quality and performance of our products as described in this online catalog only apply to our products when used in isolation. therefore, please en sure you evaluate and verify our products under the specific circumstances in which our pr oducts are assembled in your own products and in which our products will actually be used. if you use our products in equipment that requires a h igh degree of reliability, regardless of the application, it is recommended that you set up protectio n circuits and redundancy circuits in order to ensure safety of your equipment. the products and product specifications described in this online catalog are subject to change for improvement without prior notice. therefore, pleas e be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, pu rchase, or use our products. the technical information in this online catalog provides example s of our products' typical operations and application circuits. we do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. if any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and ex port control, shall be observed. the switchover date for compliance with the rohs directive /reach regulations varies depending on the part number or series of our products. when you use the inventory of our products for which it is unc lear whether those products are compliant with the rohs directive/reach regulation, please se lect "sales inquiry" in the website inquiry form and contact us. we do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. guidelines and precautions regarding the described in this online catalog. downloaded from: http:///
|
